PPSB-241KG kilogram of Light Green Glowing Additives for Paints

PPSB-241KG kilogram of Risk Reactor's  Light Green Glow in the Dark pigment was developed to go into non water based mediums.

SPECIAL DEAL! Buy four kilograms of any PPSB, PPWB, PPZNBB-06 Series colors and get FREE SHIPPING! Use the code: PPSBKG4

The light green phosphorescent pigment is the basic building block for material that glows in the dark. It works by absorbing ambient light and then re-emitting it in the visible spectrum. This process can be repeated an infinite amount of times. The color visible in regular light is an off white and it will glow a vibrant Light Green in the dark. You can mix this pigment into any clear medium such as glue, paint, wax, clay, gel candles, liquid nails, silicone, urethane, you name it. This pigment is best used right after mixing, most mediums seem to gel with this pigment over a period of time.

Benefits of Risk Reactor's PPSB-241KG Light Green Pigment:

Looks Light Green and glows Light Green!
Used extensively for fishing lures and decorative items!! 
Product can last more than 15 years, unlike conventional pigment!
Just about any light will charge it!
Glows a strong Light Green!
Non-radioactive!
Safe and non-toxic!
Can be used with just about any non-aqueous medium!
Charges an infinite amount of times!

Used In:
Clock & watch dials, paint, electronic instrument dial pads, poly urethane, home appliances, lighting apparatus and switches, exit signs, emergency signage and low level lighting escape systems (Egress Systems), shoes, caps, aircraft and automobile dials and instrument panels, firemen's equipment, traffic signs & high visibility signs, fishing equipment, military applications, outdoor path marking, camping equipment, textile printing and textile fibers, writing & printing inks, You can use this product anywhere a long afterglow and/or light fastness is needed.

PPSB-241KG Technical Information:

Appearance:Red/No Order
Melting Point: Dissociates 1200 C
Excitation Energy: 200-450 nm
Emission Wavelength: nm
Vapor Pressure: N/AP
Vapor Density: N/AP
Solubility In Water: soluble
Weight Per Cube Meter: 2.5-3.1
Chemical ID: Alkaline Earth Metal Sulfide Europium Doped 
Flammability Class: N/AP
Extinguishing Media: Water
Specific Gravity: 2.5-3.1
Freezing Point: N/AP
Percent Volatile: N/AP
Evaporation Rate: N/AP
pH (% in water): N/AP
Flash Point: N/AP
Auto-Ignition Temp: N/AP.

Glow Time Chart Measured in mcd/m2

The afterglow brightness is measured under D65 standard light source excited by 1000 lux for 10 minutes. The excitation wavelength is 253.7 nm. The instrument to determine brightness LS-100. As a general rule, the larger the particle size the greater and longer the glow. The threshold of the human eye to detect light is .32 mcd/m2 with a dark adapted eye.

How to Use
This product is easy to work with. Simply mix it with a clear medium such as clear paint, clear glue, clear wax, etc. and you will have a glowing material! Follow the guidelines below to ensure you maximize the glowing effectiveness of our products.

More powder, higher percentage will produce brighter, longer glow.
Use a white, or light color as a background for best results. Any color other than white will diminish glow.
Use the clearest vehicle possible. Any pigment in the vehicle will decrease the brightness and length of glow.
The thicker (to a point) the layer of Glow Powder will produce longer and brighter luminosity.
Try to prevent moisture in the manufacturing process.
Do not use vehicle with high acidity.
Do not grind the Glow Powder, it will destroy the crystal structure and therefore decrease luminosity.
The larger the particle size of the Glow Powder the greater the glow.
Ratio of Glow Powder to medium is from 10% to 50% by weight depending on application and manufacture process. Best to start with 30% and move and down depending on cost, manufacturing process, and other factors that are unique to your application.