CN11GAL Gallon Clear Over Coat Water Based Coating for Mxing Glow Pigments and Powders

(1 review) Write a Review
SKU:
CN11GAL
UPC:
802074006748
Weight:
128.00 Ounces
Shipping:
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 6 and get 10% off
Buy 7 or above and get 15% off
Buy 8 or above and get 20% off
  • CN11GAL Gallon Clear Over Coat Water Based Coating for Mixing Glow Pigments and Powders
  • Colorless water based paint CN11GAL by the gallon
  • Acrylic colorless extender paint for mixing fluorescent pigments by the gallon CN11GAL
  • CN1GAL Gallon of water based extender acrylic paint
  • Mixing base for glow in the dark pigments CN11GAL in gallon
MSRP: $96.00
$89.88
— You save $6.12

Description

Part number CN11GAL Our Clear Water Based Overcoat is a durable paint that goes on clear. Does not contain UV inhibitors allowing our under paints glow and fluoresce brightly.

Benefits of Risk Reactor's CN11GAL Clear Overcoat Base Paint:

  1. Strong durable acrylic coating!
  2. Goes on clear!
  3. Use as a base for making your own paint!Wear resistant!
  4. Protects paint underneath!
  5. Cleans up with water!
  6. Safe and non-toxic!
  7. Can be used on just about any surface!

CN11GAL Used In:
To protect and enhance Risk Reactor's luminous paints. Also can be used as a base to make your own paints with our fluorescent and phosphorescent pigments.

Technical Information:

Film Type: Acrylic
Film Thickness: Produces a 2 mil. Dry Film.
Coverage: Approximately 300 sq. ft. per gallon.
Drying Time: At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use soap and water.
Shelf Life: Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.

How to Use:
Spray, brush, etc. our CN1 over our luminous paints to enhance the color and protect the fluorescent or phosphorescent effect. To mix your own paint, use one of Risk Reactor's Pigments and/or dyes and simply stir into the CN1. This product can be used on just about any surface. Prepare the surface as you would with any other type of paint.

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose

1 Review

  • 5
    Ultra-Thin Flexible Finish

    Posted by David Kumpula on 2nd Nov 2023

    I've been painting with glow in the dark paints for years, but have hesitated making my own paint mixes until recently. I mixed in a bit under a pound of zinc sulfide into this water based acrylic base and painted a 5 ft x 5ft fabric drape with it. The result of two fairly thick coats was great. It allowed the fabric to be folded/rolled up without cracking the finish. As I mixed my own, I got a heavy and even application of the glow pigment. I suggest mixing thoroughly with a mixer or drill attachment and repeat mixing every 20-30 minutes to ensure the pigment doesn't begin to settle at the bottom of the can.

View AllClose

Related Products