| |
 |
Choose from our IFWB Series EPA Approved and N.S.F.(Standard 60) Water Based Tracers in liquid concentrates. Since they are liquid, they are real easy to disperse into any water based system that you want. |
Our liquid water tracing products are used in many analytical applications. The unique needs of our customer seem almost unlimited. Some of the most common uses are:
- Plumbing Tracing.
- Special Effects with Water.
- Retention Time Studies.
- Flow mapping and rate of flow studies.
- Condenser coil and tube studies.
- Power plant piping tracing.
- Water Fountains.
- Septic system analysis.
- Use for visible effects in water for theme parks.
- Pollution Studies.
- Leak Detection in many fluid carrying systems.
- Lake river and pond analysis.
- Check for illegal connections.
- Storm and sewer drain analysis.
How Fluorescent Dye Tracing Products Work:
The "visual" aspect of our dye products refers to normal reflection of light as color. The "fluorescent" aspect refers to special properties of some chemicals to absorb certain wavelengths and then emit, rather than reflect, light in response. The emission can be seen by using one of our Black Lights or precisely measured with a fluorometer. The reflected and emitted light have different wavelengths and are, therefore, not the same color.
Fluorescent Properties are of Greatest Value:
- Ease of sight in regular light since they will look brighter under all types of UV including sunlight and fluorescent lighting.
- When there is no sun or sufficient artificial light (in a sewer or a cave, for instance) they are visible. You can also take a sample to review under one of our black lights in a shady area or the lab.
- Precise quantified data is required.
- Very small amounts of tracing material is allowed.
The maximum Absorbance/Emission Wavelengths of Our Products are:
Note: IFWB-C0 Clear Blue is for invisible tracing only and requires one our Black Lights to review. The IFWB-14 Blue is for visual tracing only
Users should make their own determination of appropriate dilution levels in any specific situation, which will vary with the nature, condition, and use of the water or liquid and the specific evaluation to be performed.
For Stream Tracing and Pollution Detection:
Introduce tracers into the water at the source or suspected source of pollution. Allow sufficient time as calculated, to permit the dye tracer to reach the effluent or recipient location. Take samples of water for analysis and/or use one of our black lights if the tracer is fluorescent.
Light Stability:
Blue has the highest degree of light stability and red is recommended for yellow and green backgrounds such as algae rich water. Red, blue, and yellow green should be used in water bearing heavy sediment loads or when passing through soil with high clay content. Industrial red will absorb onto either.
Photo degradation takes place in sunlight at different rates for different dyes. Red takes from approximately five to seven days and yellow green fades in two to three days. Blue, on the other hand, breaks down in three to four weeks.
IFWB Series Liquid Water Based Tracers Concentrates
Our Water Based Tracers in Liquid form is the easiest of the tracers to use. Simply pour the tracer into the system and the dye will disperse itself very quickly.
Code |
Product |
1 Ounce |
1 Pint |
Gallon |
IFWB-K |
6 oz Water Based Tracer Kit - 1 ounce of each of the 6 IFWB series dyes including IFWB-C0, IFWB-C8, IFWB-C7, IFWB-33, IFWB-14, IFWB-C2 for a very low price. This saves you $35.00 |
IFWB-K
6 oz Kit
|
-------- |
-------- |
IFWB-KB1 |
6 oz Water Based Tracer Kit with BNB001 - 1 ounce of each of the 6 IFWB series dyes including IFWB-C0, IFWB-C8, IFWB-C7, IFWB-33, IFWB-14, IFWB-C2 and a BNB001 6” Hand Held Battery Operated Black Light. This saves you $50.95 |
IFWB-KB1
6 oz Kit w black light |
-------- |
-------- |
IFWB-KBPT |
6 pt Water Based Tracer Kit with BNB001 - 1 pt of each of the 6 IFWB series dyes including IFWB-C0, IFWB-C8, IFWB-C7, IFWB-33, IFWB-14, IFWB-C2 and a BNB001 6” Hand Held Battery Operated Black Light. This saves you $184.95 |
|
IFWB-KBPT
6 pts Kit w black light |
|
IFWB-C0 |
Clear Blue Water Invisible Fluorescent Tracer Concentrate. This is clear when diluted. Used in applications where an invisible tracing marking is required which can only be seen under Risk Reactor Black Light. The most commonly used tracer for non-visible applications because of its strength, invisibility, versatility, and highly fluorescent nature. |
IFWB-C0 by the oz! |
IFWB-C0 by the pint! |
IFWB-C0 by the gallon!
|
IFWB-C8 |
Yellow Green Visible and Fluorescent Tracer Additive
EPA Approved, NSF Certified. 1 Pint Treats 12,500 gallons for visual inspection and 125,000 gallons when used with a Risk Reactor Black Light. |
IFWB-C8 by the oz! |
IFWB-C8 by the pint! |
IFWB-C8 by the gallon!
|
IFWB-C7 |
Red Visible and Fluorescent Tracer Additive
EPA Approved, NSF Certified. 1 Pint Treats 12,500 gallons for visual inspection and 125,000 gallons when used with a Risk Reactor Black Light. |
IFWB-C7 by the oz! |
IFWB-C7 by the pint! |
IFWB-C7 by the gallon!
|
IFWB-33 |
Orange Visible and Fluorescent Tracer Additive
EPA Approved, NSF Certified. 1 Pint Treats 12,500 gallons for visual inspection and 125,000 gallons when used with a Risk Reactor Black Light. |
IFWB-33 by the oz! |
IFWB-33 by the pint! |
IFWB-33 by the gallon!
|
IFWB-14 |
Visible Blue Non-Fluorescent Aqueous Tracer Additive
EPA Approved, NSF Certified. 1 Pint Treats 12,500 gallons for visual inspection. |
IFWB-14 by the oz! |
IFWB-14 by the pint! |
IFWB-14 by the gallon!
|
IFWB-C2 |
Invisible Yellow Water Tracer Additive. This is a unique tracer used in applications where a particulate marker is needed. |
IFWB-C2 by the oz! |
IFWB-C2 by the pint! |
IFWB-C2 by the gallon!
|
Dye Kits
This is the best way to get a sampling of the dyes and to save money at the same time.
Code |
Product |
Price |
DFKIT-CO |
Clear Blue Kit IFWB-C0, DFSB-C0, DFSB-K61, DFDRY-C0, DFSB-K426, Save $50.11! |
DFKIT-CO |
DFKIT-H2O |
DFDRY-C0, DFWB-K40, DFWB-K73-52, DFWB-K73-42, DFWB-K73-51, DFWB-K7, DFWB-K250, DFWB-K28-51, DFWB-K10-50, DFWB-K10-27, DFWB-K1-80, DFWB-K25-51 , Save $120.20! |
DFKIT-H2O |
DFKIT-OIL |
DFSB-C0, DFSB-C7, DFSB-K43, DFSB-K175, DFKY-C7, DFSB-K52, DFSB-K52-55, DFSB-K87, DFSB-K44-50, DFSB-K44-65, DFSB-K40, DFSB-K413, DFSB-K82, DFSB-K63, DFSB-K41-50, DFSB-K1-80, DFSB-K61, DFSB-K426, DFSB-K401, DFSB-K149, DFSB-K400, DFSB-K427, DFSB-K160 Save $220.02! |
DFKIT-OIL |
DFKIT-COMP |
All three kits DFKIT-H2O, DFKIT-OIL, and IFWB-K Save $60.87 on the three kits themselves! |
DFKIT-COMP |
IFWB-K |
1 ounce of each of the 6 IFWB series dyes including IFWB-C0, IFWB-C8, IFWB-C7, IFWB-33, IFWB-14, IFWB-C2 for a very low price. This saves you $35.00 |
IFWB-K
6 oz Kit
|
IFWB-KB1 |
1 ounce of each of the 6 IFWB series dyes including IFWB-C0, IFWB-C8, IFWB-C7, IFWB-33, IFWB-14, IFWB-C2 and a BNB001 6” Hand Held Battery Operated Black Light. This saves you $53.95 |
IFWB-KB1
6 oz Kit w black light |
Water Based Fluorescent Dyes in Dry Form
These Dyes come in a Dry Powder Form so that you can incorporate these into Your Systems and Control Concentrations. Water Based Fluorescent Dyes are used in commercial, industrial, theatrical, water falls, dyeing of fabric, water based tracing, colorants, and numerous other applications. For pricing for > 50 pounds please email sales@riskreactor.com for a quote.
Code |
Product |
|
|
DFDRY-C0 |
Clear Blue Fluorescent Water Based Dye in dry form. |
DFDRY-C0 5 g |
DFDRY-C0 lb |
DFWB-K40 |
Gives a brilliant greenish-yellow fluorescence and is suitable for light-fast resin pigments, acrylic resins and flexographic printing inks. In combination with other basic dyes, fluorescent yellow, orange, scarlet, and green shade inks can be produced, either water or spirit based. Cationic. |
DFWB-K40 5g |
DFWB-K40 lb |
DFWB-K73-52 |
Water tracing and leak detection. Fluorescent yellow with a green cast. Excellent alkali stability for use in soaps. Used in antifreeze, radiator coolant, etc. |
DFWB-K73-52 5 g |
DFWB-K73-52 lb |
DFWB-K73-42 |
Liquid water tracing and leak detection. Fluorescent yellow with a green cast. Excellent alkali stability for use in soaps. Used in antifreeze. Anionic. |
DFWB-K73-42 1 oz |
DFWB-K73-42 pt |
DFWB-K73-51 |
Water tracing and leak detection very similar to DFWB-K73-52 but not as soluble. Anionic |
DFWB-K73-51 5 g |
DFWB-K73-51 lb |
DFWB-K7 |
Slightly more yellow than DFWB-K73-52. Outstanding alkali stability. Excellent for water based markers, due to low “salts” Anionic Soluble in Texanol. |
DFWB-K7 5 g |
DFWB-K7 lb |
DFWB-K250 |
Very high strength. Excellent for textiles (nylon, silk, and wool) Also good for inks. Anionic. |
DFWB-K250 5 g |
DFWB-K250 lb |
DFWB-K28-51 |
High strength fluorescent clear blue dye powder for textiles, soaps, and detergents. Anionic. |
DFWB-K28-51 5 g |
DFWB-K28-51 lb |
DFWB-K10-50 |
Brilliant magenta for inks, coatings, paper, and antifreeze. Perfect for water tracing applications or dyeing of water. A real strong dye. Used in various products where a non-toxic dye is needed. Cationic. |
DFWB-K10-50 5 g |
DFWB-K10-50 lb |
DFWB-K10-27 |
Liquid dye, brilliant magenta for inks, coatings, paper, and antifreeze. Cationic. |
DFWB-K10-27 1 oz |
DFWB-K10-27 pt |
DFWB-K1-80 |
Brilliant “yellow-shade” Christmas red for inks, coatings, paper, and antifreeze. Cationic. |
DFWB-K1-80 5 g |
DFWB-K1-80 lb |
DFWB-K25-51 |
Green Fluorescent water soluble dye. |
DFWB-K25-51 5 g |
DFWB-K25-51 lb |
The color of all dyes will disappear if the solution is mixed with chlorine. Add approximately 4 grams of 12% bleach to every gram of product in solution.
|
